Check whether $BOD/Config/rOpenGL.ini was created and if yes (most likely) then if $BOD/Config/Blade.config had been updated. If that's the problem try to configure anything that works (will run) like D3D/DirectSound3D_software_emulation and then try to set up rOpenGL.
If none of above works you can use my batch (in attachment; unzip in BOD directory - the directory structure is preserved) that I use to quick start of different video modes. As you will have your own rOpenGL.ini file you want use `ZIP::BOD/blade-ogl-current-quick.bat' from archive.
Important note that `Blade.config' is binary file with following structure:
int32 audio_mode_index; // from bottom of listbox, indexing from 0
int32 video_mode_index; // from top of listbox, indexing from 0
int32 unk_08; // always == 1?
and you may need to edit (with binary editor such as wxHexEditor) second value to correspond your configuration (index of rOpengl renderer in listbox, count from 0). My is 5 but yours may differ. Simply count from top which one is rOpengl option. Index is C-style and starts with 0.
# $ hexdump -C Blade.config
00000000 01 00 00 00 06 00 00 00 01 00 00 00
00000000 ^ audio ^ video ^ ??
- (4.1 KiB) Downloaded 109 times
vino puro, ...